		超精密型PO			精密型P1			載荷型Z
級數 Stage	速比 Ratio	額定輸出扭矩 Nominal Output Torque	最大加速扭矩 Maximum Acceleration Torque	回程間隙 Torsional Backlash	額定輸出扭矩 Nominal Output Torque	最大加速扭矩 Maximum Acceleration Torque	回程間隙 Torsional Backlash	額定輸出扭矩 Nominal Output Torque	最大加速扭矩 Maximum Acceleration Torque	回程間隙 Torsional Backlash	故障停止扭矩 Emergency Stop Torque	額定徑向力 Permitted Radial Load	額定徑軸向力 Permitted Axial Load
級數 Stage	速比 Ratio	Nm	Nm	arcmin	Nm	Nm	arcmin	Nm	Nm	arcmin	Nm	N	N
1	4	26	60	≤1	26	52	≤3	30	60	≤3	80	870	696
	5	27	63	≤1	27	55	≤3	31	63	≤3	100	909	727
	6	25	58	≤1	25	50	≤3	29	58	≤3	100	952	762
	7	25	58	≤1	25	50	≤3	29	58	≤3	100	1000	800
	8	22	52	≤1	22	45	≤3	25	52	≤3	90	1053	842
	9	21	48	≤1	21	42	≤3	24	48	≤3	84	1111	889
	10	21	48	≤1	21	42	≤3	24	48	≤3	84	1176	941
2	16	39	60	≤1.5	39	52	≤5	45	60	≤5	104	1333	1067
	20	39	60	≤1.5	39	52	≤5	45	60	≤5	104	1429	1143
	25	39	60	≤1.5	39	52	≤5	45	60	≤5	104	1538	1231
	32	39	60	≤1.5	39	52	≤5	45	60	≤5	104	1667	1333
	35	39	60	≤1.5	39	52	≤5	45	60	≤5	104	1818	1455
	40	39	60	≤1.5	39	52	≤5	45	60	≤5	104	2000	1600
	45	39	60	≤1.5	39	52	≤5	45	60	≤5	104	2000	1600
	50	39	60	≤1.5	39	52	≤5	45	60	≤5	104	2222	1778
	60	33	52	≤1.5	33	45	≤5	38	52	≤5	90	2500	2000
	64	30	48	≤1.5	-	-	-	-	-	-	90	2500	2000
	70	30	48	≤1.5							90	2500	2000
	80	28	48	≤1.5							90	2500	2000
	90	25	45	≤1.5							84	2500	2000
	100	25	45	≤1.5							84	2500	2000
3	64	-	-	-	39	52	≤6	47	60	≤8	104	2500	2000
	80				39	52	≤6	47	60	≤8	104	2500	2000
	100				39	52	≤6	47	60	≤8	104	2500	2000
	120				39	52	≤6	47	60	≤8	104	2500	2000
	125				39	52	≤6	47	60	≤8	104	2500	2000
	140				39	52	≤6	47	60	≤8	104	2500	2000
	160				39	52	≤6	47	60	≤8	104	2500	2000
	180				39	52	≤6	47	60	≤8	104	2500	2000
	200				39	52	≤6	47	60	≤8	104	2500	2000
	225				39	52	≤6	47	60	≤8	104	2500	2000
	250				39	52	≤6	47	60	≤8	104	2500	2000
	320				39	52	≤6	47	60	≤8	104	2500	2000

級數 Stage	速比 Ratio	最大徑向力 Maximum Radial Load	最大軸向力 Maximum Axial Load	最大側傾力矩 Max.Tilting Moment	轉動慣量 Mass Moment of Inertia	抗扭剛性 Torsional Rigidity	滿載效率 Efficiency at Full loading	重量 Weight	噪音 Operating Noise Level	額定輸入速度 Permitted Average Input Speed	最大輸入速度 Maximum Input Speed	壽命 Service lifetime	潤滑 Lubrication
級數 Stage	速比 Ratio	N	N	Nm	kgc㎡	Nm/arcmin	%	Kg	dB(A)	min	min	h
1	4	2500	2000	100	0.14	14	95	1.7	61	3000	6000	20000	超精密型 PO與載荷型 Z為油潤滑, 精密型P1為脂潤滑,兩種方式在壽命期內無需更換油脂 Ultra-precision PO and load type z are oil- lubricated,The precision P1 is grease lubricated Both methods do not require replacement of grease during the life cycle.
	5	2500	2000	100	0.13	14	95	1.7	60
	6	2500	2000	100	0.13	12	95	1.7	60
	7	2500	2000	100	0.13	12	95	1.7	58
	8	2500	2000	100	0.13	10	95	1.7	58
	9	2500	2000	100	0.13	9	95	1.7	58
	10	2500	2000	100	0.13	8	95	1.7	58
2	16	2500	2000	100	0.12	13	93	2.3	60
	20	2500	2000	100	0.075	13	93	2.3	60
	25	2500	2000	100	0.075	13	93	2.3	60
	32	2500	2000	100	0.064	13	93	2.3	60
	35	2500	2000	100	0.064	13	93	2.3	58
	40	2500	2000	100	0.064	13	93	2.3	58
	45	2500	2000	100	0.064	13	93	2.3	58
	50	2500	2000	100	0.064	13	93	2.3	58
	60	2500	2000	100	0.064	10	93	2.3	58
	64	2500	2000	100	0.064	10	93	2.3	58
	70	2500	2000	100	0.064	10	93	2.3	58
	80	2500	2000	100	0.064	10	93	2.3	58
	90	2500	2000	100	0.064	9	93	2.3	58
	100	2500	2000	100	0.064	7	93	2.3	58
3	64	2500	2000	100	0.064	13	91	3	60
	80	2500	2000	100	0.064	13	91	3	60
	100	2500	2000	100	0.064	13	91	3	60
	120	2500	2000	100	0.064	13	91	3	60
	125	2500	2000	100	0.064	13	91	3	60
	140	2500	2000	100	0.064	13	91	3	60
	160	2500	2000	100	0.064	13	91	3	60
	180	2500	2000	100	0.064	13	91	3	60
	200	2500	2000	100	0.064	13	91	3	60
	225	2500	2000	100	0.064	13	91	3	60
	250	2500	2000	100	0.064	13	91	3	60
	320	2500	2000	100	0.064	13	91	3	60
級數 Stage	速比 Ratio	最大徑向力 Maximum Radial Load	最大軸向力 Maximum Axial Load	最大側傾力矩 Max.Tilting Moment	轉動慣量 Mass Moment of Inertia	抗扭剛性 Torsional Rigidity	滿載效率 Efficiency at Full loading	重量 Weight	噪音 Operating Noise Level	額定輸入速度 Permitted Average Input Speed	最大輸入速度 Maximum Input Speed	壽命 Service lifetime	潤滑 Lubrication
級數 Stage	速比 Ratio	N	N	Nm	kgc㎡	Nm/arcmin	%	Kg	dB(A)	min	min	h
1	4	2500	2000	100	0.14	14	95	1.7	61	3000	6000	20000	超精密型 PO與載荷型 Z為油潤滑, 精密型P1為脂潤滑,兩種方式在壽命期內無需更換油脂 Ultra-precision PO and load type z are oil- lubricated,The precision P1 is grease lubricated Both methods do not require replacement of grease during the life cycle.
	5	2500	2000	100	0.13	14	95	1.7	60
	6	2500	2000	100	0.13	12	95	1.7	60
	7	2500	2000	100	0.13	12	95	1.7	58
	8	2500	2000	100	0.13	10	95	1.7	58
	9	2500	2000	100	0.13	9	95	1.7	58
	10	2500	2000	100	0.13	8	95	1.7	58
2	16	2500	2000	100	0.12	13	93	2.3	60
	20	2500	2000	100	0.075	13	93	2.3	60
	25	2500	2000	100	0.075	13	93	2.3	60
	32	2500	2000	100	0.064	13	93	2.3	60
	35	2500	2000	100	0.064	13	93	2.3	58
	40	2500	2000	100	0.064	13	93	2.3	58
	45	2500	2000	100	0.064	13	93	2.3	58
	50	2500	2000	100	0.064	13	93	2.3	58
	60	2500	2000	100	0.064	10	93	2.3	58
	64	2500	2000	100	0.064	10	93	2.3	58
	70	2500	2000	100	0.064	10	93	2.3	58
	80	2500	2000	100	0.064	10	93	2.3	58
	90	2500	2000	100	0.064	9	93	2.3	58
	100	2500	2000	100	0.064	7	93	2.3	58
3	64	2500	2000	100	0.064	13	91	3	60
	80	2500	2000	100	0.064	13	91	3	60
	100	2500	2000	100	0.064	13	91	3	60
	120	2500	2000	100	0.064	13	91	3	60
	125	2500	2000	100	0.064	13	91	3	60
	140	2500	2000	100	0.064	13	91	3	60
	160	2500	2000	100	0.064	13	91	3	60
	180	2500	2000	100	0.064	13	91	3	60
	200	2500	2000	100	0.064	13	91	3	60
	225	2500	2000	100	0.064	13	91	3	60
	250	2500	2000	100	0.064	13	91	3	60
	320	2500	2000	100	0.064	13	91	3	60